爆炸建模软件

·在 3D 中明确考虑易燃云和已识别的拥堵区域的相互作用。

·这可以使用 Multi-Energy 或 Baker Strehlow Tang 模型完成。

·可以评估高架云和限制区域以及拥挤区域之间的间隔距离。

·生成超压和脉冲（侧面、反射或动态）的爆炸参数并显示为等高线或表格报告。

·确定关键设备和结构的设计意外载荷。

·在爆炸建模软件中为一系列场景和危险类型（爆炸、火灾、有毒物质和易燃云）开发组合危险轮廓。

·考虑可能影响爆炸建模结果的方向方面（例如风或表面粗糙度）。

·快速定义禁区和安全距离，并以此为安全设计提供信息或证明合规性。

Explsions Modelling Software

     ·Explicitly consider the interaction of the flammable cloud and identified regions of congestion in 3D.

     ·This can be done using either the Multi-Energy or Baker Strehlow Tang models.

     ·Elevated clouds and regions of confinement can be assessed as well as separation distances between congested regions.

     ·Generate blast parameters for overpressure and impulse (side-on, reflected or dynamic) and display as contours or in tabular reports.

     ·Determine design accidental loads on key equipment and structure.

     ·Develop combined hazard contours in the explosion modelling software for a range scenarios and hazard types (explosions, fires, toxics and flammable clouds).

     ·Consider directional aspects that can influence the explosion modelling outcome (e.g. wind or surface roughness).

     ·Rapidly define exclusion zones and safe distances and use this to inform safe design or demonstrate regulatory compliance.